t: 01204 888330f: 01204 888331m: 07976 613587ken@hurlstonesnorthern.com
Air Handling Units Manufacturers of Air Handling Units in the HVAC Sector with more than 20 years experience, we offer full design installation, commissioning and after sales service, as well as replacement and upgrading of existing plant. Vast experience in manufacturing units suitable for Swimming Pool/Coastal Environments, Hospitals, Pharmaceuticals, Office Developments, Automotive Industry, Offshore applications and many more. As well as being able to offer packaged heat recovery systems, control systems, humidification systems, direct and indirect gas fired systems. Units can be manufactured in accordance with various specifications including C04 & HTM2025. Air Handling Systems are ISO9001 Registered and are also up to date with the latest Part L legislations and requirements.
Cold Water Booster sets Comprensive range of fixed speed and variable speed booster sets.
Expansion Vessels For use with sealed heating and chilled water system. Also available for domestic hot water systems.
MBS Integrated Heating Solution The Armstrong MBS Integrated Heating Solution is a fully integrated commercial heating solution for medium sized applications [120 kW (409 MBH) to 320 kW (1091 MBH)]. It combines the functions of low NOx gas fired condensing boilers, intelligent variable speed circulating pumps, automatic fill/top up device, expansion vessel, water treatment dosing, PLC controls, piping, electrics and thermal insulation in modules which are easily manoeuvred and connected on site. A 320 kW (1091 MBH), 5 module system can be assembled and ready for use in as little as 2 hours.
Pressurisation Units Range of pressure switch and microprocessor controled pressurisation units for heating and chilled water systems available with single or duty / standby pumps .
Pumps Extensive range of comercal heating and chilled water pumps and pumping systems ranging from canned rotor circulators to complete packaged pumping solutions, plantrooms and controls.
Powerbreeze Fan Coil Units Available as a horizontal chassis waterside control fan coil unit Powerbreez incorporates number of ground-breaking engineering and design achievements, the most significant - the Patented Revolutionary Air Inlet Design - is used to greatly reduce noise.
Breezair Evaporative Cooler The Breezair unit is the most efficient, environmentally friendly and advanced evaporative cooler in the world today. The Breezair units are manufactured by Seeley International who invest over 2.5million euros every year on research and development and have won numerous awards for their environmental awareness and energy efficiency products including the recent prestigious Dupont award for innovation. The Breezair unit is some 80% more efficient to operate than a standard air conditioning system and contains no ozone depleting refrigerant gasses. The system operates on 100% fresh air ,doors and windows are to be left open unlike a air conditioning system which recirculates air in the space, the Breezair system eliminates the recirculation of odours, bacteria and all airborne contaminants. A level of humidity is maintained in the air and is not dried out by the air conditioning process. The Breezair system supplies a continuous fresh cooled filtered air direct into the environment.
Water Treatment EnwaMatic® Side Stream Filtration & Water Treatment A unique technology for heating, cooling and process systems. Side stream filtration to less than 5 microns, corrosion inhibition, scale control and restriction of bacterial growth. A dynamic, self regulating process that ensures correct treatment is always in place, providing a practical, cost effective and green alternative to traditional chemical dosing.
Perimeter Heating Front panels and mullions of the perimeter heating are manufactured from 1.2mm Zintec material and finished in polyester powder paint, to an approved colour and gloss level. Unit dimensions can be configured to match your requirements, with panel heights from 150mm upwards and unit depths from 60mm. End caps and internal/external corners are available, similarly manufactured and finished. Heating elements can be L.P.H.W. (hot water) or electric.
Trench Heating Fraser Engineering (UK) Ltd manufactures L.T.U.® trench heating products. Trench casing assemblies, including element supports and baffle plates are manufactured from 1.2mm Zintec. The casing interior is finished in matt black self-etch paint. Heating elements can be L.P.H.W. (hot water) or electric. Fan assisted units are available where more output is required.
Car Park Ventilation Systems Providing general air change requirements, CO removal and Smoke removal using the latest induction ventilation technology. HC PVE offer a full turnkey package incorporating design, supply, installation, commissioning and after sales maintenance contracts.
K Type Valve The weighted key-shaped float of the Aylesbury K Type valve can be accurately set in a number of positions on the float arm, actuating the valve at a predetermined difference in water level, driving it fully open or fully closed without water hammer. This positive action avoids dribble, reduces noise and allows full flow until the selected level is reached.
Differential Pressure Control Valves Differential pressure control and automatic by-pass valves. Which are suitable for use in heating and cooling applications in both constant and variable volume systems.
Concept 2000 Steel panel type radiator, with one of the most comprehensive ranges on the market. With a choice of single or double convector radiators in lengths from 400mm to 3000m and heights 300mm, 400mm, 500mm, 600mm and 750mm.
t: 01204 888330f: 01204 888331m: 07870 154848paul@hurlstonesnorthern.com
Auto Flow Limiting Valves Quarter turn Servicing Valve with a ball capable of accepting an Automatic Flow Limiting Cartridge to limit the flow of hot and cold water according to its colour-coding. In addition to the eight AFL Cartridges, Strainers, Single and Double Check Valves are also available in various combinations
Booster Sets Range of single pump fixed and variable speed boosters combined with break tank for either CAT5 backflow prevention of domestic boosting.
Care Shower Incorporating Fluid Category 5 protection via "Midi-Break" booster pump, enabling instantaneous hot water shower to be connected directly to mains water supply.
Pressure Reducing Valves The PRV range from Arrow Valves is designed to provide a constant outlet pressure despite varying inlet pressures. Full range of sizes avaliable.
Pressurisation Units Arrow Valves Autofill is a compact pumpless pressurisation unit that includes the required backflow protection required to legally fill heating and chilled water systems.
RPZ valves ( Reduced Pressure Zone ) Mechanical backflow preventers approved for protection against backpressure and backsiphonage for Fluid Categories 1 – 4. RPZ Valves (BA devices) are acceptable to all water companies in the U.K. - when installed and used in accordance with the Water Regulations.
Stand pipes and hose union taps Complete range of stand pipes and hose union taps including standpipes complete with inbuilt backflow protection ( double check valves, RPZ valves ), vandal protected concealed taps and below ground taps.
Natural heating panels for indoor use Plezura is a unique range of infrared heating panels for indoor use. They provide a cost-efficient and energy-saving alternative to conventional heating systems. The panels are available in a wide range of designs, ensuring they can be fitted into any type of space, from domestic environments to professional work areas.
Natural heating panels for outdoor use Our infrared natural heating panels are a safe, energy-saving, and cost-efficient alternative to conventional outdoor heating systems. The panels instantly create a pleasant and agreeable atmosphere on garden patios and outdoor cafés. They are also available in a mobile version, providing comfortable working conditions on construction sites or in large production facilities.
Radiant Ceiling Panels Following extensive research Fraser Engineering have developed one of the most efficient designs of radiant panel on the market. This was proved to be correct, when testing by HLK Stuttgart to EN14037 showed a market leading output of 551 Watts per square metre at 55 delta T.
Air Source Heat Pumps Design, supply and install service of air source heat pumps systems.
Biomass Boilers Supply and install of a complete range of biomass boilers.
Ground Source Heat Pumps Design, supply and install service of ground source heat pump systems.
Small Scale Hydro Design, supply and install service of small scale hydro schemes.
Solar Photovoltaic Design, supply and install service of solar photovoltaic systems
Solar Thermal. Micro-Generation System offer a design supply and install service to meet the buildings solar thermal requirements.
Wind Turbines Range of wind turbines for generation of electricity.
Sectional Cold Water Storage Tanks Range of preinsulated sectional cold water storage tanks. WRC approved
Monopex Monopex convetional single pipe underfloor heating system. Ideal for systems using ground source heat pumps.
Solaris Solaris range of flat plate colectors can be combined with Rotex Sanicube hot water calorifers, Gas Solar Unit condensing boiler and DHW heater to utilise free and renewable solar energy to help protect the environment.
System 70 The unique pipe in pipe underfloor heating system allows flow temperatures of up to 82 degrees C and return temperatures of 50 degrees C to be used for underfloor heating. This allows other heating to be used such as radiators, trench heating etc to be incorporated into the underfloor heating system. This system has been designed for use with condensing boilers due to the low return temperatures.
Rainwater Harvesting Rainwater harvesting is a crucial part of the UK's sustainability strategy and Stormsaver are well respected as leaders in the rainwater recovery industry. By recycling the rainwater from your roof you can reduce your mains water consumption, reduce your water bill and reduce your carbon footprint. Specialising solely in rainwater harvesting solutions and supplying a UK designed and manufactured product has made us the preferred choice for public and private clients again and again.